Perfect for boom pole operation, the ZMT3-Phantom is to be positioned at top of the boom pole directly behind the microphone instead of near the bottom. By removing the internal or external cable, operators can eliminate any cable noise that can leak into the audio track. Weighing only 62g, the ZMT3-Phantom is constructed in a high strength impact resistant nylon polymer casing with rounded edges and machined metal that's cool to the touch.
The ZMT3-Phantom transmits using 100% digital modulation resulting in audio that's fully encrypted. Digital encryption is the only way to keep all audio transmission private. A digital transmission also provides audio quality far superior to an analog system. The ZMT3-Phantom provides a 114dB dynamic range with no limiting or compression distortion. An external antenna is added so you'll receive a terrific range. A balanced 3-pin Lemo connector provides input connectivity. Phantom power is selectable in 12, 24, 32 and 48V. The ZMT3-Phantom works with condenser, dynamic or ribbon microphones. External audio and battery status levels are easily visible for the operator from the graphic OLED.
Audio can be recorded internally to a microSD card using the highly reliable lossless MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to dead battery or early card removal. Equipped with ZaxNet, you can remotely change the frequency, pre-amp gain, output power or place the internal recorder in record, playback and stop modes.
The ZMT3-Phantom can be ordered in one of two configurations:
- • ZMT3.5-PH: covering channels 26 through 38 (512 to 614 MHz)
- • ZMT3.6-PH: covering channels 36 through 49 (596 to 698 MHz)
The ZMT3-Phantom is not intended to be used with lavalier microphones.