ZAXCOM TRXCL3

article code: ZAX.TRXCL3XX

Zaxcom TRXCL wideband dual channel camera link transceiver with internal recording

€2,607.55 incl. VAT
€2,155.00 excl. VAT

* Required Fields

€2,607.55 incl. VAT
€2,155.00 excl. VAT

Description

Deliver pristine audio quality with the TRXCL3 wide-band camera link transmitter for sound professionals in film, television or ENG applications. Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.

The TRXCL3 is designed to limit intermodulation which can occur when multiple transmitters are in close proximity to each other and mix together. The TRXCL3 sends audio with embedded timecode to camera via a UHF signal to QRX200, RX200 and QRX235 receivers or through ZaxNet's 2.4 GHz signalÿ to an ERX3TCD receiver. A TA5 audio input offers balanced stereo line level or sample rate converting AES. The 3.5mm output delivers audio and the BNC connector provides timecode in- and output. The TRXCL3 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private.

ZaxNet allows you to send or receive timecode, scratch track audio and remote control commands. Zaxcom High Density (ZHD) modulation increases the number of available channels in the wireless spectrum.

FEATURES:

  • • digital modulation
  • • encrypted audio
  • • intermodulation resistant
  • • internal recording
  • • MARF: Mobile Audio Recording Format
  • • timecode
  • • ZaxNet
  • • ZaxNet Remote
  • • ZHD Modulation

Specifications

TRANSMITTER

  • • RF Modulation: Proprietary Digital Method
  • • TRXCL3.5 RF Frequency Range: 512-614 MHz
  • • TRXCL3.6 RF Frequency Range: 596-698 MHz
  • • RF Frequency Step: 100 KHz
  • • RF Bandwidth in ZHD Mode: 50 KHz
  • • RF Bandwidth: 200 KHz
  • • Channel Separation in ZHD Mode: as close as 100 KHz (receiver dependent)
  • • Channel Separation in XR Mode: 400 KHz
  • • Antenna Connector: 50 Ohm SMA Female
  • • Emission Designator: 180 KV2E
  • • FCC Part: 74.861

TRANSMITTER AUDIO

  • • Dynamic Range: 114 dB
  • • Distortion: 0.002%
  • • Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
  • • System Group Delay: 3.5 ms
  • • Audio input connector TA5 male
  • • Analog Input Range: -10 to +4 dBu
  • • Analog input type balanced line level
  • • Audio input Impedance: 4.7 k Ohm
  • • ADC Bit-Depth: 24 Bits
  • • ADC Sampling-Rate: 48 kHz
  • • AES input Balanced with sample rate conversion
  • • Sample rate range 32 Khz to 96 Khz

TIMECODE READER / GENERATOR

  • • Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)
  • • Timecode Type: SMPTE
  • • Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

INTERNAL RECORDING

  • • Media: MicroSD Card (Flash Memory)
  • • File Format: .ZAX
  • • Recording Time: 96 Hours (16 GB Card)

2.4 GHZ ZAXNET TRANSCEIVER

  • • RF Frequency Range: 2.403 to 2.475 GHz
  • • RF Modulation: Digital Spread Spectrum
  • • RF Frequency Step: 0.001 GHz (1 MHz)
  • • RF Bandwidth: 1 MHz
  • • Channel Separation: 2 MHz
  • • Sensitivity: -96 dBm

PHYSICAL / POWER

  • • Weight: 198 gr
  • • Dimensions (H x W x D): 2.54 x 9 x 8.2
  • • Display: Graphic OLED
  • • Power Output: 25 / 50 / 100 mW Software Selectable
  • • Power consumption: 2.13 watts

Extra

Video

Team Zaxcom - Defenders of the Ai

Brand Zaxcom

Shipping

There are 2 options available:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.
  • Share on