DPA 4015A

article code
d.4015a
DPA 4015A wide cardioid modular microphone, MMP-A preamp with MMC4015 capsule
€ 1,630.00 List Price
€ 1,859.00 Our Price € 1,536.36 Our Price

d:dicate 4015A wide cardioid microphone.

  • Low profile wide pickup area
  • Natural reproduction
  • Directional ambience pickup
  • Exceptional for vocal

Expand your horizon with a wider pattern: if you are already a DPA 4011 devotee, you will discover an exciting alternative in our wide cardioid microphones. The phantom powered DPA 4015A wide cardioid differs in its polar pattern and is the perfect fill-in between an omni and a more directional microphone. Sometimes a conventional cardioid pattern just isn't quite open enough, such as when recording instruments with complex radiation patterns. In those instances, the generous polar pattern of our compact wide cardioids allows you to pick up a broader sound field and more accurately capture the full breadth of a stirring performance.

Limitless applications: recording orchestras or other ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. The wide cardioid (also known as hemispheric) design covers a greater sound angle and is an excellent choice for grand piano, guitar, marimba, and percussion, or as a spot mic for groups in a symphony orchestra. Likewise, it is an excellent speech, dubbing, or vocal mic as its enhanced richness on the bass end nicely compliments many voices.

Completely linear, even off-axis: the off-axis characteristics of the 4015A are totally linear, a unique quality when it comes to authentic sound reproduction. Any leakage that occurs from off-axis sound sources is still a faithful reproduction of these sounds, just softly attenuated.

Specialists in extreme sound levels: DPA's wide cardioid microphones are capable of handling extremely high sound pressure levels before clipping occurs. The 4015A even includes a 20dB pad switch in the center of the XLR connector to prevent overloading of the mic amp.

  • Directional pattern: wide cardioid
  • Principle of operation: pressure gradient
  • Cartridge type: pre-polarized condenser
  • Frequency range: 20Hz to 20kHz
  • Frequency range, +/-2dB: 40Hz to 20kHz
  • Sensitivity, nominal, +/-2dB at 1kHz: 10mV/Pa, -40dB re. 1V/Pa
  • Equivalent noise level, A-weighted: typ. 18dB(A) re. 20uPa (max. 20dB(A))
  • Equivalent noise level, ITU-R BS.468-4: typ. 25dB (correct with the attenuator in 0dB or -20dB setting)
  • S/N ratio (A-weighted), re. 1kHz at 1Pa (94dB SPL): typ. 76dB(A)
  • Total harmonic distortion (THD): <1% up to 139dB SPL peak
  • Dynamic range: typ. 121dB
  • Max. SPL, peak before clipping: 159dB
  • Switchable attenuator, filters etc.: 0dB / -20dB
  • Output impedance: 200Ohm
  • Minimum load impedance: 2kOhm
  • Cable drive capability: 100m
  • Output balance principle: Impedance balancing with "Active Drive"
  • Common mode rejection ratio (CMRR): >60dB
  • Power supply (for full performance): 48V Phantom power (+/-4V)
  • Current consumption: 2.8mA
  • Connector: XLR-3M. pin 1: shield, pin 2: signal + phase, pin 3: phase
  • Color: matte black
  • Weight: 158g
  • Microphone/capsule diameter: 19/19mm
  • Microphone length: 170mm
  • Maximum output voltage, RMS: >5V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°C to 45°C
  • Relative humidity (RH): up to 90%
  • Matching tolerance (frequency response and sensitivity): +/-1dB
  • Phase deviation for kit: <10°

More Information
BrandDPA
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.