DPA 4060 stereo kit

article code
d.kit4060ocsmk
DPA 4060 CORE stereo microphone kit with 2x 4060 omni-directional microphones, black
€ 1,010.00 List Price
€ 1,159.00 Our Price € 957.85 Our Price

This d:screet stereo microphone kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage. It contains a complete stereo pair, two handpicked omnidirectional condenser microphones selected on sensitivity within +/-1.5 dB.

It combines two d:screet 4060 miniature omnidirectional microphone, normal SPL, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with our d:screet 4060, 4061, 4062 and 4063 miniature microphones to place on a reflective boundary such as a floor, wall, ceiling, piano lid etc. This enables the mics to capture the ambient sound of the area. The sound captured from this "pressure zone" has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air". This solution serves as a kind of acoustical zoom.

There are many accessories included in the kit. One of them is the DMM0007 universal surface mount. This mount allows all kinds of instruments, from acoustic guitar through grand piano and drums, to be mounted in the best-sounding position. The mount uses special non-marking adhesive discs for attachment.

FEATURES:

  • extremely rugged and reliable
  • exceptional audio quality
  • low noise and high sensitivity
  • large selection of accessories
  • modular adapter system fits most professional wireless systems

INCLUDED WITH KIT:

  • 2x 4060-OC-C-B00: 4060 CORE Omni Mic, black
  • 2x DMM0007 universal surface mount
  • 2x DAD6001BC Microdot to 3-pin XLR with belt clip
  • 1x DUA0531B foam windscreen, black, 5 pieces
  • 2x DUA6001P soft boost grid
  • 2x BLM6000B boundary layer mount, black
  • 1x DDM0011B magnet mount black
  • 2x MHS6005 microphone holder for strings

  • directional pattern: omnidirectional
  • principle of operation: pressure
  • cartridge type: pre-polarized condenser
  • frequency range: 20Hz-20kHz
  • frequency range, +/-2 dB: soft boost grid (20Hz-20kHz), 3dB soft boost at 8-20kHz High boost grid (20Hz-20kHz), 10 dB boost at 12 kHz
  • sensitivity, nominal, +/-3dB at 1kHz: 20 mV/Pa, -34 dB re.1 V/Pa
  • equivalent noise level, A-weighted: typ. 23dB(A) re.20 Pa (max. 26 dB(A))
  • equivalent noise level, ITU-R BS.468-4: typ. 35dB (max. 38 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): typ. 71dB(A)
  • total harmonic distortion (THD)-Legacy: <1% THD up to 123dB SPL peak, <1% THD up to 120dB SPL RMS sine
  • total harmonic distortion (THD)-CORE: <1% THD up to 129dB SPL peak
  • dynamic range-Legacy: typ. 100dB
  • dynamic range-CORE: typ. 106dB
  • max. SPL, peak before clipping: 134dB
  • output impedance: 30-40 Ohm
  • cable drive capability: up to 300m (984ft)
  • power supply (for full performance): for wireless systems, min. 5V-max. 50V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099, 48V phantom power +/-4V for full performance
  • connector: MicroDot
  • color: black, beige, brown or white
  • weight: 7.5 g incl. cable and MicroDot connector
  • microphone diameter: 5.4 mm
  • microphone length: 12.7 mm
  • cable length: 1.8 m
  • polarity: positively increasing sound pressure produces positive going voltage on MicroDot pin
  • temperature range: -40°C to 45°C
  • relative humidity(RH): up to 90%

More Information
BrandDPA
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.