DPA 4061 CORE+
BIG SOUND - SMALL FOOTPRINT
This series contains the 4060, 4061, 4062, 4063 and 4071 Omnidirectional Condenser Lavalier Mics. Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original 4060, the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications.
The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments.
ACADEMY-HONORED MINIATURES
In 2021, the Academy of Motion Picture Arts and Sciences' Board of Governors bestowed a Technical Achievement Award to DPA miniature microphones. The award is directed specifically to Jens-Jorn Stokholm and Ole Moesmann for the innovative development of high-performance miniature and subminiature DPA lavalier microphones.
4061 MINIATURE OMNIDIRECTIONAL MICROPHONE, LOAD SPL
This microphone is acoustically identical to the 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs).
The 4061 Miniature Omnidirectional Microphone, Loud SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices.
In comparison, the 4061 is about 10 dB less sensitive than the 4060 and therefore works well when used for hidden applications, for example mounted on the head or forehead of a theater performer. In this placement, the sound pressure level is about 10 dB louder than what you encounter with chest placement (lapel microphone).
FEATURES:
- exceptional audio quality
- uniform, consistent sound between DPA mics
- extremely rugged and reliable
- diminutive size made for flexible and easy concealment
- large selection of clips, windscreens, grids and other accessories
- modular adapter system fits most professional wireless systems
IN THE BOX:
- 1x 4061 omnidirectional microphone
- 1x (attached) soft boost grid
- 1x high boost grid
- directional pattern: omnidirectional
- principle of operation: pressure
- cartridge type: pre-polarized condenser
- frequency response: 20 Hz 20 kHz
- effective frequency range ±2 dB: soft boost grid: 20 Hz 20 kHz, 3 dB soft boost at 8 20 kHz. High boost grid: 20 Hz 20 kHz, 10 dB boost at 12 kHz
- sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa, -44 dB re. 1 V/Pa
- equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
- equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
- distortion, THD < 0.5%: 133 dB SPL RMS, 136 dB SPL peak
- distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
- dynamic range: Typ. 111 dB
- max. SPL, THD 10%: 144 dB SPL peak
- rated output impedance: 30 40 ohm
- cable drive capability: up to 300 m (984 ft) with DAD9001 XLR Adapter
- power supply (for full performance): for wireless systems Min. 5 V max. 10 V through DPA adapter / With DAD9001: P48 (Phantom Power). Will work from 12 V
- current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD9001 XLR Adapter
- connector: MicroLock, TA4F Mini-XLR, TA5F, 3-pin LEMO, 6-pin LEMO, Mini-Jack
- weight: 7.5 g incl. cable and MicroLock connector
- microphone diameter: 5.4 mm
- microphone length: 12.7 mm
- cable length: 1.8 m
- polarity: Positively increasing sound pressure produces positive going voltage on MicroLock pin
- temperature range: -40°C to 45°C
- relative humidity (RH): Up to 90%
- sensitivity selection tolerance (at 1 kHz): ±1.5 dB
- colors: black, beige, brown, white
Brand | DPA |
---|