DPA 4071 CORE

article code
d.4071occxxx
DPA 4071 CORE omni-directional microphone with presence boost, loud SPL
As low as € 569.00 Our Price € 470.25 Our Price

The 4071 miniature omnidirectional microphone, presence boost is a fantastic lavalier mic, which features a presence boost of typically 5 dB at 4 to 6 kHz. This is critical for a chest-placed microphone because the frequency range of the consonants spoken is damped in this position, which results in poor intelligibility. The 4071 has a boost that maximizes speech intelligibility. This microphone will be able to handle sound pressure levels up to 144 dB before clipping occurs. When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut at 100 Hz has been incorporated in the 4071's capsule so the built-in preamplifier (and the wireless system) will have a much larger headroom. Furthermore, the low-cut filter removes low-frequency rumble, noise and proximity effect.

FEATURES:

  • excellent speech reproduction
  • discreet, compact design
  • fits both left and right buttoned shirts
  • delivered with both black and white pop filters
  • modular adapter system fits most professional wireless systems

  • directional pattern: omnidirectional
  • principle of operation: pressure
  • cartridge type: pre-polarized condenser
  • frequency response: 20Hz-20 kHz
  • effective frequency range, +/-2 dB: 100Hz-15kHz with typ. 5dB soft boost at 4-6kHz
  • sensitivity, nominal, +/-23 dB at 1kHz: 6 mV/Pa, -44dB re. 1V/Pa
  • equivalent noise level, A-weighted: typ. 26dB(A) re. 20µPa (max. 28 dB(A))
  • distortion, THD<1% Legacy: 120 dB SPL RMS, 123 dB SPL peak
  • distortion, THD<1% CORE: 134 dB SPL RMS, 137 dB SPL peak
  • dynamic range Legacy: typ. 97dB
  • dynamic range CORE: typ. 111 dB
  • max. SPL, THD 10%: 144 dB SPL peak
  • rated output impedance: 30-40 Ohm
  • cable drive capability: up to 300 m with DAD6001-BC XLR adapter
  • power supply (for full performance): for wireless systems min. 5V to max. 10 V through DPA adapter
  • power supply (With DAD6001-BC): P48 (Phantom Power), will work from 12V
  • current consumption: typ. 1.5 mA (microphone) & 3.5 mA with DAD6001-BC XLR adapter
  • connector: MicroDot, TA4F mini-XLR, 3-pin LEMO, mini-jack
  • color: black
  • weight: 7.5g incl. cable and MicroDot connector
  • microphone diameter: 5.4 mm
  • microphone length: 17.6 mm
  • cable length: 1.8 m
  • polarity: positively increasing sound pressure produces positive going voltage on MicroDot pin
  • temperature range: -40°C to 45°C
  • relative humidity (RH): up to 90%

More Information
BrandDPA
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.