DPA 4098 CORE tabletop

article code
d.4098dcdbxx
DPA 4098 CORE super-cardioid tabletop microphone
As low as € 749.00 Our Price € 619.01 Our Price

A complete, supercardioid tabletop microphone solution, which is ideal for either permanently affixing to or temporarily placed on a table in conference venues, meeting rooms and board rooms.

This solution can be scaled up as needed. In smaller rooms you might only need one microphone to capture the best sound. In larger settings, you can use multiple mics to ensure each area of the room is completely covered. The best audio quality is obtained in a one-to-one solution - one microphone position close to one speaker.

With very low noise and a high sensitivity, our supercardioid tabletop microphones offer the most clear, transparent and natural sound available on the miniature mic market. They ensure maximum speech intelligibility regardless of the acoustical environment. With a linear response, low distortion and an extremely large dynamic range, they sound great in any environment.

The microphone base is made specifically to work with the 4098 CORE supercardioid podium microphone. It has an elegant yet unobtrusive design with a black, non-reflective surface and integrated shock mount, which ensures that vibrations from people touching the table as well as reverberations from people walking in and out of the room will not affect the sound. The audio cables are an integral part of the microphone base unit.

The standard tabletop solution is equipped with a 43 cm, black gooseneck and comes in three standard kits to meet your exact needs:

  • tabletop microphone, 43 cm, black with MicroDot (unbalanced)
  • tabletop microphone, 43 cm, black with XLR (balanced)

Other gooseneck lengths can be ordered separately as well. We recommend tabletop solutions with goosenecks in 16cm, 28 cm and 43 cm versions. Longer goosenecks should be avoided.

FEATURES:

  • outstanding audio quality
  • slim, elegant Scandinavian design
  • highly directional very isolated
  • high rejection of radio frequency interference
  • meets the needs of architects, AV consultants, system integrators and installing electricians

INCLUDED WITH:

  • 1x 4098 CORE supercardioid tabletop microphone
  • 1x foam windscreen
  • 1x DM6000 microphone base

GENERAL:

  • directional pattern: supercardioid
  • principle of operation: pressure gradient
  • cartridge type: pre-polarized condenser
  • frequency response: 20Hz-20 kHz
  • effective frequency range +/-2 dB at 20 cm: MicroDot 80Hz-15kHz with 3dB soft boost at 8-15kHz & XLR-3M: 100Hz-15kHz with 3dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80Hz
  • sensitivity, nominal, +/-3 dB at 1 kHz: 16 mV/Pa -36dB re. 1V/Pa
  • equivalent noise level, A-weighted: typ. 23dB(A) re. 20µPa (max. 26dB(A))
  • distortion, THD<1% Legacy: 122dB SPL RMS, 125dB SPL peak
  • distortion, THD<1% CORE: 130dB SPL RMS, 133dB SPL peak
  • dynamic range Legacy: typ. 102dB
  • dynamic range CORE: typ. 110dB
  • max. SPL, THD 10%: 135dB SPL peak
  • rated output impedance: from MicroDot: 30-40 Ohm
  • rated output impedance: from XLR connector or DAD6001-BC XLR Adapter: 100 Ohm
  • minimum load impedance: 2 kOhm
  • cable drive capability: MicroDot up to 300 m with DAD6001-BC XLR adapter & XLR-3M: up to 100m
  • output balance principle: signal balanced with XLR connector or DAD6001-BC XLR adapter
  • common mode rejection ratio (CMRR): >60dB from 50Hz to 15kHz with DAD6001-BC XLR adapter
  • power supply (for full performance): MicroDot min. 5 V to max. 10 V through DPA adapter for wireless systems or P48 (Phantom Power) with DAD6001-BC XLR adapter OR XLR-3M: P48 (Phantom Power)
  • current consumption: typ. 1.5 mA (microphone) & 3.5 mA with DAD6001-BC XLR adapter
  • connector: MicroDot or XLR-3M
  • color: black or white

WEIGHT:

Microdot:

  • 16 cm: 12g
  • 28 cm: 20g
  • 43 cm: 28g
  • 77 cm: 55g
  • 122 cm: 67g

XLR-3M:

  • 20cm: 75g
  • 32cm: 80g
  • 47cm: 88g
  • 77cm: 115g
  • 122cm : 127g

DIMENSIONS:

  • microphone diameter: 5.7 mm
  • microphone length: Microdot: 16cm, 28cm, 43cm, 77cm, 122cm & XLR-3M: 20cm, 32cm, 47cm, 77cm, 122cm
  • polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
  • temperature range: -40°C to 45°C
  • relative humidity (RH): up to 90%

More Information
boom length43cm boom (top gooseneck)
BrandDPA
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.