DPA ST4015A

article code
d.st4015a
DPA 4015A wide cardioid modular stereo microphone kit, incl. 2x 4015A (MMP-A + MMC4015), case, holders and windscreens
€ 3,350.00 List Price
€ 3,819.00 Our Price € 3,156.20 Our Price

A complete Stereo Pair with two carefully factory-matched d:dicate ST4015A wide cardioid microphones. Even though the standard tolerances on d:dicate series are extremely low, a stereo match is even closer. These mics are matched within +/-1dB on both frequency response and sensitivity. Our wide cardioid microphones are capable of handling extremely high sound pressure levels before clipping occurs. The d:dicate 4015A wide cardioid microphone even includes a 20dB pad switch in the center of the XLR connector to prevent overloading of the mic amplifier. The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays.

The microphone capsule: the off-axis characteristics of the MMC4015 wide cardioid microphone capsule are totally linear, a unique quality when it comes to authentic sound reproduction. Any leakage that occurs from off-axis sound sources is still a faithful reproduction of these sounds, just softly attenuated. Sometimes a conventional cardioid pattern just isn't quite open enough. Recording orchestras or other ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. When recording instruments with complex radiation patterns, the wide cardioid (also known as hemispheric) design covers a greater sound angle and is an excellent choice. This is the often ideal mic for recording grand piano, guitar, marimba, and percussion, or as a spot mic for groups in a symphony orchestra. Likewise, it is an excellent speech, dubbing, or vocal mic as its enhanced richness on the bass end nicely compliments many voices.

A truly flexible range: this mic is part of the flexible d:dicate microphone series. At any time, and with no tools needed, it is possible to transform the d:dicate 4015A wide cardioid microphone into a new configuration. You can combine it with another d:dicate or d:facto microphone capsule or Preamplifier. The MMC wide cardioid microphone capsule coupled with the MMP-A preamplifier suits acoustic instruments and voices with rich and open sound. For another option, match the MMC4015 wide cardioid microphone capsule with the MMP-C compact preamplifier for an excellent spot mic as a fill-in between an omni and a cardioid. The compact version is easier to position than other cardioid microphones. The d:dicate 4015A wide cardioid microphone is also available as a single microphone.

FEATURES:

  • low profile wide pickup area
  • natural reproduction
  • directional ambience pickup
  • carefully matched within +/-1dB
  • peli Case transportation and protection
  • Modular flexibility

  • Directional pattern: wide cardioid
  • Principle of operation: pressure gradient
  • Cartridge type: pre-polarized condenser
  • Frequency range: 20Hz to 20kHz
  • Frequency range, +/-2dB: 40Hz to 20kHz
  • Sensitivity, nominal, +/-2dB at 1kHz: 10mV/Pa, -40dB re. 1V/Pa
  • Equivalent noise level, A-weighted: typ. 18dB(A) re. 20uPa (max. 20dB(A))
  • Equivalent noise level, ITU-R BS.468-4: typ. 25dB (correct with the attenuator in 0 dB or -20 dB setting)
  • S/N ratio (A-weighted), re. 1kHz at 1Pa (94dB SPL): typ. 76dB(A)
  • Total harmonic distortion (THD): <1% up to 139dB SPL peak
  • Dynamic range: typ. 121dB
  • Max. SPL, peak before clipping: 159dB
  • Switchable attenuator, filters etc.: 0dB / -20dB
  • Output impedance: 200Ohm
  • Minimum load impedance: 2kOhm
  • Cable drive capability: 100m
  • Output balance principle: Impedance balancing with "Active Drive"
  • Common mode rejection ratio (CMRR): >60dB
  • Power supply (for full performance): 48V Phantom power (+/-4V)
  • Current consumption: 2.8mA
  • Connector: XLR-3M. pin 1: shield, pin 2: signal + phase, pin 3: phase
  • Color: matte black
  • Weight: 158g
  • Microphone/capsule diameter: 19/19mm
  • Microphone length: 170mm
  • Maximum output voltage, RMS: >5V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°C to 45°C
  • Relative humidity (RH): up to 90%
  • Matching tolerance (frequency response and sensitivity): +/-1dB
  • Phase deviation for kit: <10°

More Information
BrandDPA
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.