NEUMANN M 150 Tube

article code
ne.m150tube
Neumann M150 Tube small diaphragm omni-directional tube microphone, incl. N149A EU power supply, KT8 microphone cable, EA170 elastic suspension, dust cover and aluminium case, nickel
€ 7,995.00 Our Price € 6,607.44 Our Price

The M 150 Tube is a unique small diaphragm condenser microphone for orchestral recordings, based on the legendary Neumann M 50. The M 150 uses a titanium capsule flush mounted in a small sphere to create an omni pattern which becomes directional at higher frequencies. An innovative transformerless tube circuit ensures a vivid sound with low noise.

Like its predecessor, the M 150 uses a 12 mm small diaphragm capsule, flush mounted in a 40 mm sphere. The capsule itself is a pressure transducer, but the sphere modifies its omni-directional pattern to become gradually more directional at higher frequencies. The M 150's condenser transducer is extraordinary in other respects, too: Its ultra-thin diaphragm is made of titanium, a light yet rigid metal, and spaced only 10 microns from the backplate, also made of titanium. The result is a sound transducer with unparalleled transient response. This delicate capsule is protected by an acoustically open headgrille, shaped just like that of the venerable M 50.

The capsule signal is amplified by a tube circuit using a subminiature triode, specially selected for optimal transmission characteristics and lowest self-noise of only 15 dB-A. Unlike its ancestor developed in the 1950s, however, the M 150 does not use an output transformer which might color the sound. Instead, the M 150 relies on an ultra-transparent transformerless output stage ensuring a clear low end, even at highest levels, and a wide dynamic range of 119 dB. Moreover, this state of the art output stage allows for long cable runs of up to 300 m without transmission losses.

A -10 dB switch allows to attenuate the microphone signal at the output for use with low headroom preamps. Another switch activates a 40 Hz rumble filter. In the LIN position, the low cut filter is not entirely deactivated but shifted to 16 Hz in order to protect the console input from sub-audio noise as the capsule's low frequency response is virtually unlimited.

The M 150 is primarily designed to bring unprecedented detail and realism to orchestral recordings, e.g. of classical pieces and film scores. Due to its unique "directional omni" characteristic, its outstanding transient response, and a gradually rising sensitivity above 1 kHz, the Neumann M 150 is the perfect microphone for DECCA Tree techniques, including extended surround setups.

FEATURES:

  • ideal for DECCA Tree stereo and surround recordings
  • modern version of the legendary Neumann M 50
  • unique all-titanium capsule
  • extended frequency response and unparalleled transient accuracy
  • tube circuit with transformerless output stage
  • very low self-noise
  • comes with N149A power supply

  • acoustical operating principle: pressure transducer
  • directional pattern: omni-directional
  • frequency range: 20 Hz up to 20 kHz
  • sensitivity at 1 kHz into 1 kOhm: 20 mV/Pa
  • rated impedance: 50 Ohms
  • rated load impedance: 1 kOhms
  • equivalent noise level, CCIR: 28 dB
  • equivalent noise level, A-weighted: 15 dB-A
  • typical SPL (tube characteristic) for K lower than: 0.5%: 114 dB
  • typical SPL (tube characteristic) for K lower than: 5%: 134 dB
  • signal-to-noise ratio, CCIR (re. 94 dB SPL): 66 dB
  • signal-to-noise ratio, A-weighted (re. 94 dB SPL) 6 79 dB
  • maximum output voltage: 8 dBu
  • dynamic range of the amplifier, DIN/IEC 651, for THD lower than 0.5%: 99 dB
  • dynamic range of the amplifier, DIN/IEC 651, for THD lower than 5%: 119 dB
  • power supply: N 149 A
  • matching connector: microphone DIN 8 F, power supply XLR 3 F
  • weight: 800 g
  • diameter: 78 mm
  • length: 165 mm

More Information
BrandNeumann
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.