ZAXCOM RX200
article code
zax.rx200
Zaxcom RX200 2-channel wideband ENG receiver with 4x AA battery compartment, 512-698 MHz
€ 2,371.60 Our Price € 1,960.00 Our Price
The RX200 is a 200MHz wide compact battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 27, or 512 to 698MHz, while still filtering out unwanted RF.
The RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It's is also capable of receiving and outputting the embedded SMPTE time code on a BNC connector also on mic, line or consumer levels.
The RX200 / TRX900CL Camera Link combo is a great solution for sending two channels of 100% digital audio with embedded SMPTE timecode from bag to camera.
FEATURES:
- small and light-weight with Zaxcom's patented side-mounted LED's, the RX200 is easy to mount on any camera from small format DSLR to a full size ENG rig.
- flexibility from afar: RX200 has an automatic tracking front end filter so you can receive on any frequency in any block from 20 through 27 (512-698MHz) with impressive range
- self sufficient: the ultra compact RX200 isn't only small, but powers itself on 4 internal AA batteries for up to 12 hours for use with any camera big or small
- going all out: output AES digital or analog audio via a single TA5 connector and timecode from a dedicated BNC connector
RECEIVER:
- receiver RF channels: 1
- diversity method: antenna switching
- RF modulation: proprietary digital method
- RF frequency range: 518 to 698MHz
- RF frequency step: 100KHz
- RF signal bandwidth: 200KHz
- channel separation: 500KHz (700KHz recommended)
- sensitivity: -114dBm
- antenna connector: 50Ohm SMA female X 2
RECEIVER AUDIO - ANALOG OUTPUT x2:
- dynamic range: 116dB
- distortion: 0.002%
- frequency range: 20Hz to 16kHz
- DAC Bit-depth: 24bits
- connector: TA-5M
- audio output: active analog balanced
- audio output level: -35dBm (mic), -10dBm (consumer) or 0dBm (line)
RECEIVER OUTPUT:
- signal format: AES balanced
- AES dynamic range: 123dB
- frequency range: 20Hz to 16kHz
- AES output: AES3 balanced at 96KHz
- audio output connector: TA-5M
TIMECODE:
- timecode output connector: BNC
- timecode output level: 0.01VPP, 0.2VPP, 0.5VVP, 0.9VPP, 1.5VPP
- time code output rate: 23.98, 24, 25, 29.97 ND, 29.97 DF, 30
POWER:
- external power: 6 to 18VDC (140mA @ 12VDC)
- power connector: Switchcraft 760k
- internal power: 4 AA batteries
- Li-Ion battery life: up to 12 hours
- NiMH battery life: up to 8.5 hours
- Alkaline battery life: up to 7 hours
MISC:
- serial control port: RS422
- weight: 3492.6grs (without internal batteries)
- dimensions (in mm): 25 x 89 x 89
- display: graphic white OLED pan
| Firmware | |
|---|---|
| Brand | Zaxcom |
